Lull 944E-42 Service Manual User Manual download pdf (Page 163)

100

101

5.17

Model 644E-42/944E-42 Rev. 6/04

Axles, Drive Shafts, Wheels, Tires and Brakes

5.4.4 Drive Shaft Installation

IMPORTANT: To help ensure optimum performance, the

drive shaft assemblies are specially balanced as a unit at

the factory. When servicing any flange yoke, slip yoke, or

drive shaft tube, order a complete assembly if

components are bent or damaged. Refer to the

appropriate Parts Manual for ordering information.

a. Transmission-to-Axle Drive Shafts

1. Level the vehicle, ground the carriage, place the

travel select lever in the (N) NEUTRAL position,

place the neutral lock lever in the (N) NEUTRAL

LOCK position, engage the parking brake switch and

shut the engine OFF.

2. Place an Accident Prevention Tag on both the

ignition key switch and steering wheel, stating that

the vehicle should not be operated. (Refer to Section

1.5, “Accident Prevention Tag Usage.”)

3. Unlock and open the engine cover. Allow the engine,

transmission and hydraulic fluid to cool.

4. If the vehicle has dual batteries, disconnect both

negative battery cables (12 and 13) from both

batteries.

To access the lower battery (14), loosen the knob

(15) far enough so that the lip (16) on the upper

battery box clears the knob. Lift up the upper battery

box (17) and swing it out, so that the box clears the

hydraulic tank support bracket, to gain access to the

lower negative battery cable (12). Disconnect the

lower negative battery cable.

MU0740

Axle

Transmission

MU0650

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 163

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual