Lull 944E-42 Service Manual User Manual download pdf (Page 173)

100

101

5.27

Model 644E-42/944E-42 Rev. 6/04

Axles, Drive Shafts, Wheels, Tires and Brakes

Note: If the brake discs are worn beyond the gaps

given, the brake disc must be replaced on both sides of

the axle at the same time.

7. Repeat steps 5 and 6 for the other side of the axle.

8. Fill the axle with Universal Tractor Fluid through the

axle fill hole (8) until the oil level is even with both

axle level holes (9).

See chart of approved fluids. The axle capacity is

10.6 qt (10 liters) for the front axle of the 944E and

9.5 qt (9 liters) for the front axle of the 644E. Fill axle

slowly, the oil has to run across the differential. Allow

time for the oil to run across the differential. Axle level

is correct when oil is up to both level plugs.

9. Reassemble the level plugs using new o-rings.

10. Re-install the axle fill plug (8) into axle housing.

11. Remove the remote portable hydraulic pressurizing

unit on the parking brake gauge port (3).

12. Place the valve plate cover (2) back inside the cab.

Reinstall the capscrews (1). Torque capscrews to, 18

lb-ft (25 Nm).

MU0580

Approved Universal Tractor Fluid

John Deere JDM J20C (HY-GARD)

Ford/New Holland ESN-M2C134-D

(HYDRAULIC OIL 134)

Massey-Ferguson M-1141 (PERMANTRAN III)

Chevron CHEVRON 1000 THF

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 173

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual