Lull 944E-42 Service Manual User Manual download pdf (Page 581)

Model 644E-42/944E-42 Rev. 6/04

Electrical System

Check 40 amp open cab

vehicle main fuse (F1) and 15

amp ignition control fuse (F2).

Check that transmission gear

select lever is in the

NEUTRAL DETENT (N)

Engine will not crank or

starter solenoid does

Check that parking brake

switch is engaged.

Check battery for proper

charge and that connections

are clean and tight.

With ignition switch in start

position, check starter

solenoid terminal, wire

[ST2] (BLU) connection for

battery voltage.

Replace starter.

Check for battery voltage at

starter positive (+) battery

post (RED cable). Check

negative (-) cables for proper

ground and that they are

clean and tight.

Continued on 9.73

Clean, tighten and recheck.

Before troubleshooting any

electrical circuit, ALWAYS

begin by checking the

1. All connections relating to

circuit are clean and tight.

2. All grounding straps are

intact and securely

fastened, refer to Section

9.1.12, “General Overview

(Vehicle Ground Strap

Locations).”

Lull 944E-42 Service Manual User Manual Page 581