Lull 944E-42 Service Manual User Manual download pdf (Page 168)

100

101

Axles, Drive Shafts, Wheels, Tires and Brakes

5.22

Model 644E-42/944E-42 Rev. 6/04

5.5.4 Installing Wheel and Tire Assembly

Onto Vehicle

IMPORTANT: The tires must be installed onto the

wheels to rotate in the proper direction. The wheel and

tire assemblies must be installed with the directional

tread pattern “arrows” rotating in the direction of forward

travel.

1. Position wheel onto studs on wheel end of axle.

2. Install wheel lug nuts. Be sure to install the lock

washers (1 and 3), with narrow side toward the rim,

under the lug nuts (2 and 4).

3. (644E Only) Use the torque sequence diagram

(A - H), to alternately check the torque of each of the

eight lug nuts. Torque 430 - 470 lb-ft (583 - 637 Nm).

(944E Only) Use the torque sequence diagram

(A - K), to alternately check the torque of each of the

ten lug nuts. Torque 430-470 lb-ft (583-637 Nm).

4. Inflate the tire to 65 psi (448 kPa).

5. Drive the vehicle and aggressively steer and brake

several times. Re-torque the lug nuts.

PT07202

Tread “arrows” must

point in the direction of

forward travel.

Install tires onto wheels to

rotate in proper direction

and with air valve facing

toward outside of vehicle.

OU0140

MU5200

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 168

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual