Lull 944E-42 Service Manual User Manual download pdf (Page 719)

100

101

9.209

Model 644E-42/944E-42 Rev. 6/04

Electrical System

13. Lower and lock engine cover. To release and lower

the engine cover (12) from the fully raised position,

lift up slightly on the cover and push the upper part

of the right gas shock (13) (orange tab) to the left.

Line up the upper part of the shock lock tube with the

lower part of the gas shock and pull the cover down

to the closed position.

9.14 SWITCHES AND SOLENOIDS

9.14.1 Ignition Switch

The ignition switch (14) is located on the lower right side

of the dash. It is a key-operated switch used to start the

engine and to run the vehicle.

The ignition switch (14) is turned clockwise from the

OFF (15) position to the RUN (16) position and then to

the START (17) position. The START position is spring-

loaded to return the switch to the RUN (16) position. The

START (17) position must be momentarily held in place

for normal starting.

In the OFF (15) position the entire electrical system is

shut down, with power at the ignition switch and the

starter solenoid only.

In the RUN (16) position, all controls and indicators are

operable.

When the parking brake switch is ON and the

transmission is in NEUTRAL DETENT (N), pushing and

turning the ignition switch to the START (17) position

engages the starter to start the engine.

4110390

OU0780

MU1250

1 2 ... 714 715 716 717 718 719 720 721 722 723 724 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 719

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual