Lull 944E-42 Service Manual User Manual download pdf (Page 247)

100

101

7.45

Model 644E-42/944E-42 Rev. 6/04

Engine: Cummins 4BT 3.9, B4.5T and QSB 4.5T

31. Install the transmission oil hoses (14) from the

reservoir retainer assembly (15) to the

transmission. (16). The transmission oil inlet

hose (17) brings oil from the oil cooler to the

transmission. The transmission oil outlet hose (18)

directs oil from the transmission to the cooler.

Note: Use new oiled o-rings as required. ALWAYS

replace seals, o-rings, gaskets, etc., with new parts to

help ensure proper sealing and operation. Lubricate

seals and o-rings with clean hydraulic oil.

Note: Torque all the fittings as specified in Section 2.3,

“Torques.”

32. Install the hydraulic reservoir (19), by sliding the tank

in and under the engine.

33. Install hydraulic vent hoses (20, 21, and 22). Torque

each hose end to 57 ± 7 lb-ft (77 ± 10 Nm).

34. Install the hydraulic oil return hose (23). Connect

(plug-in) the return oil filter pressure switch (24).

Note: Use new oiled o-rings as required. ALWAYS

replace seals, o-rings, gaskets, etc., with new parts to

help ensure proper sealing and operation. Lubricate

seals and o-rings with clean hydraulic oil.

Note: Torque all the fittings as specified in Section 2.3,

“Torques.”

35. Install the hydraulic support bracket (25) by aligning

the holes on the left side of the bracket with the

holes on the pod. Insert from the bottom, two

capscrews (28). From the top, install two flat

washers (29), and two nuts (30). Torque to

37-66 lb-ft (50-90 Nm). Install two capscrews (26) to

secure the right side of the support bracket (27).

Torque to 21-38 lb-ft (29-52 Nm).

MU0940

MU3010

MU3000

MU2090

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 247

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual