Lull 944E-42 Service Manual User Manual download pdf (Page 703)

100

101

9.193

Model 644E-42/944E-42 Rev. 6/04

Electrical System

11. With the ignition switch (28) in the RUN position (29)

press the front wiper switch (31) to the LOW (center)

position and then to the OFF position to “Park” the

front wiper motor on the left side of the windshield.

Turn the ignition switch back to the OFF

position (30).

12. Assemble the front wiper arm assembly (32) to the

wiper motor shaft (33) and the pivot shaft (34). The

wiper blade should be parallel with the left side of the

windshield.

13. Assemble the washers (35) and acorn nuts (36) to

the pivot shaft (34) and the motor shaft (33). Tighten

both securely.

14. Assemble the washer hose (37) onto the hose

connector on the wet kit adapter (38).

15. Lower and lock engine cover. To release and lower

the engine cover (39) from the fully raised position,

lift up slightly on the cover and push the upper part

of the right gas shock (40) (orange tab) to the left.

Line up the upper part of the shock lock tube with the

lower part of the gas shock and pull the cover down

to the closed position.

16. Turn ignition switch (28) to the RUN position (29),

and test the windshield wiper LOW speed and HIGH

speed functions. Turn the ignition switch to the

OFF (30) position.

17. If previously removed, install hydraulic hoses under

the dash. (Refer to Section 8.12.10, “Service Brake

Valve,” or Section 8.12.11, “Power Steering Valve.”)

MU0650

MU5910

MU6080

4110390

OU0780

1 2 ... 698 699 700 701 702 703 704 705 706 707 708 ... 845 846

Comments to this Manuals

No comments

Lull 944E-42 Service Manual User Manual Page 703

Comments to this Manuals

Related products and manuals for Special machinery Lull 944E-42 Service Manual