Lull 944E-42 Service Manual User Manual download pdf (Page 155)

Model 644E-42/944E-42 Rev. 6/04

Axles, Drive Shafts, Wheels, Tires and Brakes

Note: If new frame sway (front) or stabilizer (rear)

cylinder bearings (11) have been installed in the axle,

the fracture in the bearing race must be positioned at the

9 o’clock (20) or 3 o’clock (21) positions.

Note: ALWAYS replace elastic locknuts with new elastic

locknuts to help ensure proper fastening.

7. Move the cylinder (12) into position on the axle

cylinder anchor (13). Insert a cylinder mount pin (14)

through the cylinder and cylinder anchor. Secure the

cylinder mount pin (14) with one capscrew (15) and

a new elastic locknut (16). Torque to 12-22 lb-ft

8. Apply multi-purpose grease through the lube fitting

(17) to lubricate the self-align bearing (11) and the

cylinder mount pin (14).

9. Install the drive shaft assemblies (18-Front or

19-Rear). (Refer to Section 5.4.4, “Drive Shaft

Installation.”)

Lull 944E-42 Service Manual User Manual Page 155